| Journals |
| 1. |
T. Kermanidis, A.D. Zervaki, V.Modas, A.N. Chamos, Sp.G. Pantelakis,
Fatigue Performance of Pre-corroded 6xxx Aluminum Alloy Laser Beam Welds with Dissimilar Heat Treatment , Procedia Engineering 74, pp. 22-26(2014) |
| 2. |
Sp. G. Pantelakis, P. V. Petroyiannis, Al. Th. Kermanidis,
Corrosion and hydrogen embrittlement of the 2024 aircraft aluminium alloy, Corrosion Reviews, Volume 25, Issue 3-4, pp. 363–376, (2011) |
| 3. |
Al.Th. Kermanidis, A.D. Zervaki, G.N.Haidemenopoulos, Sp.G. Pantelakis,
‘‘Effects of temper condition and corrosion on the fatigue performance of a laser-welded Al-Cu-Mg-Ag(2139) alloy’’, Materials and Design (31), 2010, p.p. 42-49 |
| 4. |
A.T. Kermanidis, A.D. Zervaki, G.N. Haidemenopoulos, Sp.G. Pantelakis,
‘‘The influence of salt fog exposure on the fatigue performance of alcald 6xxx aluminum alloys laser beam welded joints’’, Journal of Materials Science, (45), 2010, p.p 4390-4400 |
| 5. |
G. N. Labeas, Diamantakos, I., Kermanidis, Th. ,
Assessing the effect of residual stresses on the fatigue behavior of integrally stiffened structures, in Theoretical and Applied Fracture Mechanics, Vol. 51, Issue 2, pp. 95-101, (2009) |
| 6. |
T.G. Chondros, G. N. Labeas, M. Linardopoulou and T. Kermanidis,
“Lateral Vibration of a fatigue cracked free-free beam by variational formulation and numerical analysis”, International Journal of Advances in Mechanics and Applications of Industrial Materials, IJAMAIM 1 (1), 93 – 108, (2008) |
| 7. |
Al. Th. Kermanidis, Sp. G. Pantelakis,
‘‘A Fracture Mechanical Model for the Prediction of the Corrosion Dependent Local Fracture Toughness of 2024 Alloy’’, Journal Strain Analysis, (41), No.3, 2006, p.p.253-261 |
| 8. |
Al.Th. Kermanidis, D.G. Stamatelos, G.N. Labeas, Sp.G. Pantelakis,
‘‘Tensile behaviour of corroded and hydrogen embrittled 2024 T351 aluminum alloy specimen’’, Theoretical & Applied Fracture Mechanics (45), 2006, p.p. 148-158 |
| 9. |
G. Labeas and Th. Kermanidis ,
‘‘Stress multiaxiality factor for crack growth prediction using the strain energy theory’’, Theoretical and Applied Fracture Mechanics, 45, pp. 100-107, 2006 |
| 10. |
Th. Kermanidis, G. Labeas, M. Sunaric, A. Johnson and M. Holzapfel,
‘‘Bird strike simulation on a novel composite leading edge design’’, International Journal of Crashworthiness, vol. 11, no. 3, pp. 189-201, 2006 |
| 11. |
G. Labeas, J. Diamantakos, T. Kermanidis,
Crack link-up for multiple site damage using an energy density approach, Theoretical and Applied Fracture Mechanics, 43(2), pp. 233-243, (2005) |
| 12. |
Al.Th. Kermanidis, P.V. Petroyiannis, Sp.G. Pantelakis ,
‘‘Fatigue and Damage Tolerance Behaviour of Corroded 2024 T351 Aircraft Aluminum Alloy’’, Theoretical and Applied Fracture Mechanics (43), 2005, p.p. 121-132 |
| 13. |
P. V. Petroyiannis, Al.Th. Kermanidis, R.Akid, C.A.Rodopoulos, Sp.G.Pantelakis,
‘‘Analysis of the Effects of Exfoliation Corrosion on the Fatigue Behaviour of 2024-T351 Aluminium Alloy Using the Fatigue Damage Map’’, International Journal of Fatigue (27), 2005 p.p. 817-827 |
| 14. |
Th. Kermanidis, G. Labeas, Sp. G. Pantelakis,
‘Simulation of Bird Strike on a Composite Leading Edge’’, In: Proc. of the European Conference for Aerospace Sciences, Moscow, Russia, 03-07 July, 2005, (4.03.05) |
| 15. |
Th. Kermanidis, G. Labeas, M. Sunaric and R. Ubels,
‘‘Development and validation of a novel bird strike resistant composite leading edge structure’’, Applied Composite Materials, 12, pp. 327-353, 2005 |
| 16. |
P. V. Petroyiannis, Al. Kermanidis, P. Papanikos, Sp. Pantelakis,
“Corrosion-Induced Hydrogen Embrittlement of 2024 and 6013 Aluminium Alloys”, Theoretical and Applied Fracture Mechanics, 41, (2004), p.p. 173-183 |
| 17. |
Al. Th. Kermanidis, Sp. G. Pantelakis,
‘‘Effect of Corrosion of the Local Fracture Toughness of 2024 Aluminum Alloy’’ |
| 18. |
G. Labeas, J. Diamantakos, Al. Kermanidis, Sp. Pantelakis ,
“Assessment of Widespread Fatigue Damage in the Presence of Corrosion”, Journal ‘FACTA UNIVERSITATIS’, Series Mechanics, Automatic Control and Robotics, Vol. 3, No 13, University of Nis, (2003), p.p. 689-706 |
| 19. |
G. Labeas, Th. Kermanidis,
“Crushing behaviour of the energy absorbing ‘tensor skin’ panels”, Fatigue Fracture Engineering Materials Structures Vol. 26, 2003, p.p. 449-457 |
| 20. |
S.A. Tsirkas, P. Papanikos, Th. Kermanidis,
“Numerical Simulation of the Laser Welding Process in Butt-joint specimens”, Journal of Materials Processing Technology, 134(1), 2003, pp. 59-69 |
| 21. |
A. Th. Diamantoudis, Th. Kermanidis, M. Veljkovic,
“DBA of High Strength Steel Pressure Vessels” In: Proc. of the 29th MPA-Seminar Safety and Reliability in Energy Technology, Materialprufungsanstalt (MPA) Universitat Stuttgart, Stuttgart, Ger, October 9-10, 2003, Vol. 2, p.p. 46a.1-46a.12 |
| 22. |
J. Z. Zuo, Al. Th. Kermanidis, Sp. G. Pantelakis,
“Strain Energy Density Prediction of Fatigue Crack Growth From Hole of Aging Aircraft Structures”, Theoretical and Applied Fracture Mechanics 38, (2002), p.p. 37-51 |
| 23. |
K. I. Tserpes, G. Labeas, P. Papanikos, Th. Kermanidis,
“Strength prediction of bolted joints in graphite/epoxy composite laminates”, Composites Part B, Vol. 33 is. 7, 2002, p.p. 521-529 |
| 24. |
G. Labeas, Th. Kermanidis and J. Diamantakos,
“Efficient engineering approaches for the prediction of fatigue propagation of corner cracks in the case of Multiple Site Damage”, FACTA UNIVERSITATIS, Series: Mechanics, Automatic Control and Robotics, ISSN 0354 – 2009, Vol.3, No 13, 2002, pp. 671-688 |
| 25. |
D. Diamantakos, G. Labeas, Sp. Pantelakis, Th. Kermanidis,
“A Model to Assess the Fatigue Behaviour of Ageing Aircraft Fuselage”, Fatigue Fract Engng Mater Struct 24, (2001), pp. 677-686 |
| 26. |
Al. Th. Kermanidis, Sp. G. Pantelakis,
“Fatigue Crack Growth Analysis of 2024 T3 Aluminium Specimens Under Aircraft Service Spectra”, Fatigue Fract Engng Mater Struct 24, (2001), pp. 699-710 |
| 27. |
K. I. Tserpes, P. Papanikos, T. Kermanidis,
A three‐dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading, Fatigue & Fracture of Engineering Materials & Structures, 24(10), pp. 663–675, (2001) |
| 28. |
An. K. Kyrsanidi, Th. B. Kermanidis, Sp. G. Pantelakis,
“An Analytical Model for the Prediction of Distortions Caused by the Laser Forming Process” Journal of Materials Processing Technology, 104, (2000), pp. 94-102 |
| 29. |
K. Tserpes, P. Papanikos, Th. Kermanidis,
“A three-dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading”, Fatigue Fracture Engineering Materials & Structures, Vol. 24, 2000, p.p. 663-675 |
| 30. |
An. K. Kyrsanidi, Th. B. Kermanidis, Sp. G. Pantelakis,
Numerical and experimental investigation of the laser forming process, Journal of Materials Processing Technology, Volume 87, Issues 1–3, pp. 281-290, (1999) |
| 31. |
Sp. Pantelakis, Al. Kermanidis, P. Daglaras,
“Crack-growth Analysis Code for Assessing Fatigue Life of 2219-T851 Aluminum Specimens Under Aircraft Structure Service Spectra”, Theor. and Appl. Fract. Mech. 28, (1997), pp. 1-12 |
| 32. |
Sp. Pantelakis, Th. Kermanidis, G. Haidemenopoulos,
“Mechanical Behaviour of 2024 Al Alloy Specimen Subjected to Paint Sripping by Laser Radiation and Plasma Etching”, Theor. and Appl. Fract. Mech. 25, (1996), pp. 139-146 |
| 33. |
Th. Kermanidis, G. Labeas ,
“Static and Stability Analysis of Composite Plates by a Semi-Analytical Method”, Computers & Structures, Vol. 57, no. 4, 1995, pp. 673-679 |
| 34. |
Sp. Pantelakis, Th. Kermanidis, D. Pavlou,
“Fatigue Crack Growth Retardation Assessment of 2024-T3 and 6061-T6 Aluminium Specimens”, Theor. and Appl. Fract. Mech. 22, (1995), pp. 35-42 |
| 35. |
Th. Kermanidis, G. Lentzos, Sp. Pantelakis, D. Hammond,
“A Mechanical Model to Investigate Airfoil De-Icing Mechanics” Journal of Flight Science and Space Research (ZFW)”, 19, (1995) pp. 299-306 |
| 36. |
Th. Kermanidis, F.I Mavrothanasis,
“Calculation of Mode III Stress Intensity Factor by BEM for Cracked Axisymetric Bodies”, Computational Mechanics, Vol. 16., pp. 124-131, (1995) |
| 37. |
Th. Kermanidis, F.I Mavrothanasis, G.A. Lentzos,
“B.E. Analysis of a cracked cylindrical rod twisted by rotation of a flat annual stamp”, Computational Mechanics-Special Issue (IABEM-93, Braunschweig), Vol. 15, pp. 334-341 (1995). |
| 38. |
Th. Kermanidis and G. Labeas,
“Stability and Vibration Analysis of Composite Plates by semi - analytical method”, Advances in Non-Linear Finite Element Methods, Civil - Comp Press, 1994, pp. 273-278 |
| 39. |
Th. Kermanidis, F. Mavrothanasis,
“Boundary integral formulation of cracked axisymmetric bodies under torsion”, Theoretical and Applied Fracture Mechanics, Vol. 19, 1993, p.p. 195-206 |
| 40. |
Th. Kermanidis, Sp. Pantelakis, N. Batsoulas,
“Creep Damage Assessment of Austenitic Steel Specimen Subjected to Time Varying Load”, Theoretical and Applied Fracture Mechanics, Vol. 17, (1992), pp.7-18 |
| 41. |
Sp. Pantelakis, Th. Kermanidis, G. Labeas, V. Schulze,
“Development of Aerospace Thermoplastic Composite Structural Components Using the Superplastic Forming Technique”, In: Proc. of the 5th European Conference on Composite Materials, 7‑10 April, Bordeaux, France, 1992, pp. 537-544 |
| 42. |
Sp. Pantelakis, N. Batsoulas, Th. Kermanidis,
“Prediction of the Creep Behaviour of Metallic Materials Under Step Loading Using a Simple Mechanical Model”, Steel Research 62, No. 6, (1991), pp. 272‑278 |
| 43. |
Th. Kermanidis, Sp. Pantelakis, N. Batsoulas,
“A Mechanical Rheological Model for the Prediction of the Creep Behaviour of Metallic Materials Under Constant Loading”, Metall Vol. 44 (1990), pp. 1167 -1170 |
| 44. |
Th. Kermanidis, Sp. Pantelakis, D. Pavlou,
“Increase in Hardening of 2024-T42 Aluminum With Fatigue Stress Amplitude”, Theoretical and applied Fracture Mechanics Vol.14 (1990), pp. 43‑47 |
| 45. |
A. D. Tsantiotou Kermanidou, E. Mastrogiannis, Th. Kermanidis ,
“Torsion des unendliches Halbraumes durch einen Kreisformigen Stempel”, Ing. Archiv Vol. 55 (1985), p. 428 |
| 46. |
Th. Kermanidis ,
“On the Torsion of a finite Cylindrical rod dy a flat annular Stamp”, Engineering Analysis Vol. 2 (1985) p. 217 |
| 47. |
E. Mastrogiannis, Th. Kermanidis ,
“A numerical solution of the annular stamp. Problem”, Computer methods in Appl. Mech. and Engin. Vol. 35 (1982), p. 285 |
| 48. |
E. Mastrogiannis, Th. Kermanidis ,
“Planar crack occupying a finite doubly connected region inside an infinite elastic solid”, Computers and structures, Vol. 15 (1982), p. 661 |
| 49. |
E. Mastrogiannis, Th. Kermanidis ,
“On the external planar Crack Problem”, Mech. Res. Comm., Vol. 9 (1982), p.211 |
| 50. |
E. Mastrogiannis, Th. Kermanidis , A. Mastrogiannis,
“On the problem of two Collinear external line cracks”, Letters in Appl. and Eng. Sciences, Vol. 20 (1982) p. 1353 |
| 51. |
Th. Kermanidis ,
“KUPRADZE S Functional Equation for the Torsion Problem of Prismatic Bars Part II”, Comp. Meth. in Appl. Mech. and Eng. Vol. 7 (1976) P. 249 |
| 52. |
Th. Kermanidis ,
“Exact computation of the shear stresses of beams, using Integral Equations”, Tehnika Chronika (1976) pp. 222 |
| 53. |
Th. Kermanidis ,
“KUPRADZE S Functional Equation for the Torsion Problem of Prismatic Bars Part I”, Comp. Meth. in Appl. Mech. and Eng. Vol. 7 (1976) P. 39 |
| 54. |
Th. Kermanidis,
“Loesung des Torsionsproblems unter Beruecksichtigung von Ecken”, ZAMM 55 S. T65 (1975) |
| 55. |
Th. Kermanidis ,
“A Numerical solution for Axially Symmetrical Elasticity Problems”, Int. J. of solids and Structures 11, S.493 (1975) |
| 56. |
Th. Kermanidis ,
“Die sekundaeren schubspannungen im Biegebalken”, Mech. Res. Comm. Vol. 2 (1975), p. 227 |
| 57. |
Th. Kermanidis ,
“Ein Beitrag zur Torsion prismatischer Staebe”, ZAMM 54, S. T117 (1974) |
| 58. |
Th. Kermanidis ,
“Eine Integralgleichungsmethode zur Losung des Torsionsproblems des Umdrehungskoerpers””, Acta Mechanica 16, S. 175 (1973) |
| 59. |
Th. Kermanidis,
"Ein Beitrag zue Torsionsproblem von runden Wellen mit veraenderlichem Halbmesser", ZAMM 52, S.T136 (1972) |
| Conferences |
| 60. |
Sp.G. Pantelakis, A.N. Chamos, D. Setsika, Al.Th.Kermanidis.
"An investigation on the necessity of aluminum cladding as a protective means against corrosion of aircraft 2024 aluminum alloy", In Proc. of
13th International Conference on Mesomechanics, Vicenza, 6-8 July 2011
|
| 61. |
Sp. Pantelakis, A. Chamos, Al. Kermanidis, Ch. Rodopoulos
‘‘Examining the potential of patterned cladding for the aging behaviour of 2024-T351’’, published in the book of abstracts of the 2nd International Workshop On: Corrosion Modeling for Life Prediction, Rome, Italy, 18-20 April, 2010 |
| 62. |
A. D. Zervaki, A. T. Kermanidis, G. N. Haidemenopoulos, Sp. G. Pantelakis
‘‘Fatigue failure investigation of pre-corroded and Laser-Welded Al-Cu-Mg-Ag alloy with different temper condition’’, to be published in Proc. of the 63rd Annual Assembly & International Conference of the International Institute of Welding, Istanbul, TURKEY, 11-17 July, 2010 |
| 63. |
K. I. Tserpes, Th. Kermanidis
Progressive damage modeling: A scale-independent strength prediction method, 9th HSTAM International Congress in Mechanics, Limassol, Cyprus, July 12-14 2010 |
| 64. |
Al. Kermanidis, Sp.G. Pantelakis
‘‘Fatigue crack growth and remaining life assessment of 2024 aluminum with variation in microstructure’’, In: CD-ROM Proc: of the ASME Conference, Prague, Czech Republic, July 26-30, 2009 |
| 65. |
G. Labeas, I. Diamantakos and Th. Kermanidis
‘Analysis of crack patterns under three-dimensional residual stress field’, in Proc. of 1st International Conference of Engineering Against Fracture, Patras, Greece, 28-30 May 2008 |
| 66. |
Al. Th. Kermanidis, V.K. Spiliadis, Sp.G. Pantelakis
‘‘Fatigue crack growth rate under constant amplitude loading and under tensile overloads in sheet and plate 2024 aluminum alloy’’, In: Proc. of the 9th MESOMECHANICS: Particle & continuum aspects of mesomechanics: integrity thresholds for materials and structures, Giens, France, May 13-17, 2007, p.p. 649-656 |
| 67. |
Sp.G. Pantelakis, Al.Th. Kermanidis, G.A. Papadimitriou, G.N. Haidemenopoulos, A.D. Zervaki
‘‘Fatigue performance of 2139 aluminum alloy laser beam welds following exposure to salt spray environment’’, In: Proc. of the 9th MESOMECHANICS: Particle & continuum aspects of mesomechanics: integrity thresholds for materials and structures, Giens, France, May 13-17, 2007, p.p. 605-611 |
| 68. |
Al. Th. Kermanidis, Sp. G. Pantelakis, G. N. Haidemenopoulos, A. D. Zervaki
‘‘Effect of Prior Corrosion Damage on the Fatigue Behaviour of 2139 and 6156 Aluminum Alloy Laser Beam Welds’’, In: CD-ROM Proc. of the WELAIR Workshop, Hamburg, June 13-15, 2007 |
| 69. |
Al. Th. Kermanidis, Sp. G. Pantelakis, G.N Haidemenopoulos, A.D.Zervaki
‘‘The influence of existing corrosion on the fatigue behaviour of 2139 aluminum laser beam welds’’, In: Book of Abstracts of the 2nd World Congress on Corrosion in the Military, Naples, Italy, September 26-29, 2007 |
| 70. |
Sp.G. Pantelakis, P.V. Petroyiannis, Al. Th. Kermanidis, D. Stamatelos, G. Labeas, H.Kamoutsi, V. Bontozoglou, G.N. Haidemenopoulos
‘‘Numerical Investigation on the Tensile Behaviour of Pre-Corroded 2024 Alloy’’, In: CD-ROM Proc. of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3-7, 2006 |
| 71. |
Al.Th. Kermanidis, Sp. G. Pantelakis
‘‘An Introduction to Industrial Applications of Nanotechnology’’, In: Proc. of the Nanotechnology Summer School 2006, Jesi-Ancona, Italy, September 05-08, 2006 |
| 72. |
G. Labeas and Th. Kermanidis
‘‘Impact Behaviour Modelling of a Composite Leading Edge Structure’’, Proc. of Fracture of Nano and Engineering Materials and Structures, 16th European Conference on Fracture, July 3-7, 2006 Alexandroupolis, Greece, pp. 1259-1260 |
| 73. |
G. Labeas, S. Tsirkas, Al. Kermanidis, Sp. Pantelakis
‘‘Fatigue Behaviour Prediction of Laser Surface Treated Aluminium Plates Through Simulation of the Laser Stripping Process’’, In: CD-ROM Proc. of the 11th International Conference on Fracture, 20-25 March, Turin, Italy, 2005 |
| 74. |
Sp. G. Pantelakis, P.V. Petroyiannis and Al. Th. Kermanidis
'Corrosion and Hydrogen Embrittlement of the 2024 Aircraft Aluminum Alloys’’, In: CD-ROM Proc. of the First World Congress on Corrosion in the Military, Sorrento, Italy, 06-08 June, 2005, p.p. 55-56 |
| 75. |
Sp. G. Pantelakis, G. Labeas, Al. Th. Kermanidis and D.Stamatelos
‘‘Numerical Simulation of the tensile Behaviour of Corroded and Hydrogen Embrittled 2024 T351 Aluminum Alloy Specimen’’, In: Proc. of the 7th Mesomechanics Conference on Materials for Safety and Health, Montreal, Canada ,01-04 August, 2005, p.p. 106-114 |
| 76. |
G. Labeas and Th. Kermanidis
‘‘Investigation on the stress multiaxiality factor for crack growth prediction using the strain energy density theory’’, Proc. of Materials for Safety and Health Mesoscopic and Multiscale Consideration in Modern Science and Engineering, Montreal, Canada (2005) pp. 283-291 |
| 77. |
G. Labeas, S. Tsirkas, J. Diamantakos and Al. Kermanidis
“Effect of residual stresses due to laser welding on the Stress Intensity Factors of adjacent crack”, Proc. of 11th International Conference on Fracture, ICF-11, 20-25 March 2005, Torino, Italy |
| 78. |
Th. Kermanidis, G. Labeas and M. Sunaric,
‘‘Material Damage Modeling and Techniques for Bird-Strike Impact Simulations on Composite Leading Edge’’, In. Proc. of the International Conference on Influence of Traditional Mathematics and Mechanics on Modern Science and Technology, 24-28 May, Messini, Greece, 2004, p.p 163-172 |
| 79. |
Guy Baylac, A. Th. Diamantoudis, Th.Kermanidis, Pierre Bocquet, Peter Langerberg
“Design-by-Analysis for construction of high strength steel pressure vessels – Input of ECOPRESS ”, In. Proc. of the “European Symposium on Pressure Equipement – ESOPE 2004” Association Francaise des Ingenieurs en Appareils a Pression, Paris, September 28-30, 2004 |
| 80. |
Th. Kermanidis and G. Labeas
‘‘Simulation of High Velocity Impact on Composite Aircraft Leading Edge Structures’’, Euro-Pam 2004 Conference, Paris, 11-13 October 2004 |
| 81. |
Th. Kermanidis, G. Labeas and G. Diamantakos,
‘‘Investigation on the crack link-up criteria at multiple site damage conditions’’, In: G.C. Sih, Th.B. Kermanidis and Sp.G. Pantelakis (eds.) Proceedings of ‘Multiscaling in Applied Science and Emerging Technology’ Patras (2004) pp. 483-492 |
| 82. |
Sp. G. Pantelakis, Al. Th. Kermanidis, P. V. Petroyiannis
‘‘Fatigue and Damage Tolerance Behaviour of Corroded 2024 T351 Aircraft Aluminum Alloy’’, In: Proc: of the Conference ‘Cumulative Fatigue Damage’, 27-29 May, Seville, Spain, 2003, p.p. 63-71 |
| 83. |
Th. Kermanidis, K. I. Tserpes, P. Papanikos, G. Labeas, Sp. Pantelakis
“Fatigue Damage Accumulation and Residual Strength Assessment in Composite Laminates Through Progressive Damage Modeling”, In: Proc. of International Conference on Computational Mesomechanics associated with Development and Fabrication of Use-Specific Materials, The University of Tokyo, 26-28 August, Japan, Sanjyo-Hall, 2003, p.p. 167-174 |
| 84. |
Th. Kermanidis
‘‘Effect of Corrosion and Corrosion Induced Hydrogen Embrittlement on the Integrity of Aiging Aircraft Components’’, ICCES 03, In: Proc: of the International Conference, Corfu, 25-29 July, 2003, Greece |
| 85. |
Th. Kermanidis, M. Sunaric,
"High Speed Debris And Bird-Strike Induced Damages on Aircraft Leading Edges", In: Proc: of the 5th Euromech Solid Mechanics Conference, Thessaloniki, 17-22 August, 2003, Greece |
| 86. |
Th. Kermanidis, G. Labeas, Sp. Pantelakis, D. Kohlgrueber, J. Wiggenraad
“Simulation of the Impact Response of Composite Aircraft Substructures”, In: Proc. of the 4th Seminary Experimental Techniques and Design In Composite Materials 4, Sheffield, U.K., September 1-2, 1998, A.A.Balkema Publishers, 2002 (edited by M.S. Found), p.p. 117-128 |
| 87. |
Al. Th. Kermanidis, P. V. Petroyiannis, Sp. G. Pantelakis
“Effect of Corrosion and Corrosion Induced Hydrogen Embrittlement on the Fatigue Behavior of 2024 Aluminum Alloy”, In: Proc. of International Symposium of Multiscaling in Mechanics, 2-6 September, Messini, Greece, 2002, p.p. 120-127 |
| 88. |
K. I. Tserpes, P. Papanikos, Th.Kermanidis
“Progressive fatigue damage modeling of CFRP laminates at the mesoscale level”, In: Proc. of the “International Symposium of Multiscaling Mechanics”, Messini, Greece, September 2-6, 2002 |
| 89. |
Th. Kermanidis, S.A. Tsirkas, P. Papanikos
“Effect of Laser Welding Parameters on the Distortion of Thin Ship Panels”, In: Proc. of the 1st International Conference on Manufacturing Engineering (ICMEN), 3-4 October, Halkidiki, Greece, 2002 |
| 90. |
Al. Kermanidis, N.D. Alexopoulos, Sp.G. Pantelakis
'Fatigue Behavior of Corroded Aluminum Specimens'', In Proc of the 1st Panhellenic Conference on Metallic Materials, 29-30 November 2001, University of Thessaly, p. 128-133 |
| 91. |
Sp. Pantelakis, Al. Kermanidis, P. Papanikos
“Mesodamage of 2024-T3 Aluminum Alloy Specimen due to Corrosion-Induced Localized Hydrogen Embrittlement”, In: CD-ROM Proc. of the Tenth International Conference on Fracture, December 2001, Hawaii |
| 92. |
Sp. G. Pantelakis, Al. Th. Kermanidis
“Fatigue Crack Growth Analysis of 2219 T851 and 2024 T3 Aluminum Specimens Under Aircraft Service Spectra”, In : CD-ROM Proc. of IASS-IACM 2000 4th International Colloquium on Computational Methods for Shell & Spatial Structures, 5-7 June, Chania-Cetre, Greece, 2000 |
| 93. |
Th. Kermanidis, G. Labeas, K.I. Tserpes, Sp. Pantelakis,
“Finite Element Modelling of Damage Accumulation in Bolted Composite Joints Under Incremental Tensile Loading”, In: CD-ROM Proc. of the 3rd European Congress on Computational Methods in Applied Science and Engineering, 11-14 September, Barcelona, Spain, 2000 (edited by E. Onate) |
| 94. |
P. G. Kontoulis, Th. B. Kermanidis
“The LTSM-MSD Boundary Element Code for Fracture Mechanica Problems”, In: Proc. of IASS-IACM 2000 4th International Colloquium on Computation of Shell and Spatial Structures”, June 5-7, 2000, Chania-Centre, Greece |
| 95. |
Th. B. Kermanidis, J. D. Diamantakos, P. G. Kontoulis
“Structural Integrity Analysis of Ageing Aircraft Structures” in Proc. of International Conference of Role of Mesomechanics for Development of Science and Technology, Xi’ an, China, June 13-16, 2000 pp. 1093-1102 |
| 96. |
Sp. G. Pantelakis, Th. B. Kermanidis, P.G. Daglaras and Ch. Alk. Apostolopoulos
“The Effect of Existing Corrosion on the Structural Integrity of Aging Aircraft”, In: Proc. of the RTO AVT Workshop on “Fatigue in the Presence of Corrosion”, Corfu, Greece, 7-8 October 1998: AGRAD RTO MP-18, 1999, pp. 6.1 to 6.13 |
| 97. |
Th. B. Kermanidis, Sp. G. Pantelakis
“Structural Integrity Analysis of Ageing Structures”, In: Honorary volume for Professor D.D. Raftopoulos, Research Committee School of Engineering, Democritus University of Thrace, Xanthi, Greece Editor: Em. Gdoutos, pp. 240-265 |
| 98. |
Th. Kermanidis, G. Labeas, C. Apostolopoulos and L. Michielsen
“Numerical simulation of composite structures under impact”, In: Proc. of ‘Structures Under Shock and Impact’ (SUSI), Thessaloniki, 24-26 June 1998, p.p. 591-600 |
| 99. |
Th. Kermanidis, An. Kyrsanidi, Sp. Pantelakis
“Numerical Simulation of the Laser Forming Process in Metallic Plates”, In: Proc. of the 3rd International Conference on Surface Treatment '97, 15-17 July, Oxford, U.K., 1997, WIT Press, pp.307-316 |
| 100. |
G. Labeas, Th. Kermanidis
“Development of an annular anisotropic plate element using Transfer Matrix Method”, In: Proc. of the 1st Hellenic Conference on Composite Materials and Structures, Xanthi, Greece, July 2-5, 1997, p.p. 495-507 |
| 101. |
Th. Kermanidis, G. Labeas and J. Diamantakos
“Corner crack growth simulation using through crack equivalence and finite element sub-modelling techniques”, In: Proc. of Conference on ‘Structural Maintainance of Ageing Aircraft’ (SMAAC), Task 2, NLR Amsterdam, 15-17 Oct. 1997 |
| 102. |
Th. Kermanidis, G. Labeas, J. Lentzos and J. Diamantakos
“Efficient computation of stress intensity factors under Multiple Site Damage conditions using Finite Element Substructuring Techniques”, In: Proc. of Conference on ‘Structural Maintainance of Ageing Aircraft’ (SMAAC), Task 2, NLR, Amsterdam, 15-17 Oct. 1997 |
| 103. |
Sp. Pantelakis, Th. Kermanidis, Th. Spathopoulos, E. Baxevani
“Forming Techniques of Advanced Thermoplastic Composite Materials”, In: Engineering Application of Fracture Mechanics, Volume 14: “Advanced Technology for Design and Fabrication of Composite Materials and Structures”, Applications to the Automotive, Marine, Aerospace and Construction Industry”, The Netherlands, Kluwer Academic Publishers, (1995), The Netherlands, pp.365-375 |
| 104. |
Sp. Pantelakis, Th. Philippidis, Th. Kermanidis
“Damage Accumulation in Thermoplastic Laminates Subjected to Reversed Cyclic Loading”, In: Proc. of the 4th International Symposium on Advanced Composites, 18-22 September, Corfu, Greece, 1995, pp. 156-164 |
| 105. |
Sp. Pantelakis, Al. Despotopoulos, G. Lentzos and Th. Kermanidis
“Influence of the Laser Paint Stripping Process on the Mechanical Behaviour of Fibre Reinforced Composites”, In: Proc. of the 4th European Conference on Advanced Materials and Processes, 25-28 September, Padua/Venice, Italy, 1995, pp. 345-348 |
| 106. |
Sp. Pantelakis, Th. Kermanidis, D. Pavlou
“Fatigue Life Assessment of Composite Specimen Subjected to Random Loading”, In: Proc. of the International Conference on Design and Manufacturing Using Composites (ATMAM'94), 10-12 August , Montreal, Canada, 1994, pp. 456-467 |
| 107. |
Sp. Pantelakis, Th. Kermanidis, P. Daglaras
“Mechanical Behaviour of Pre-corroded Advanced Al-Li Alloys 2091 and 8090 and the Conventional Aerospace Al Alloy 2024” In: Proc. of the Fourth International Conference on Production Engineering and Design for Development, 27-29 Dec., Cairo, Egypt, 1993, Vol. 1, pp. 128-138 |
| 108. |
N. Vassilas, Sp. Pantelakis, Th. Kermanidis
“A Method for the Prediction of Creep Behaviour of Structural Components”, In: Proc. of the “1st National Congress on Computational Mechanics”, 3‑4 Sept., Athens, Greece, Vol. I, 1992, pp. 159-166 |
| 109. |
Th. Kermanidis, G. Labeas
“Static analysis of Elastic Layered Plates using the Transfer Matrix method”, In: Proc. of the "1st National Congress on Computational Mechanics", 3-4 Sept. 1992, Athens, Greece. pp.132-139 |
| 110. |
Th. Kermanidis, F. Mavrothanasis
“Crack problems in axissymetric bodies by BEM”, In: Proc. of the "1st National Congress on Computational Mechanics", 3-4 Sept. 1992, Athens, Greece, Vol. 1, pp.19-26 |
| 111. |
Sp. Pantelakis, N. Batsoulas, Th. Kermanidis
“Prediction of the Creep Behaviour and Creep Life of Metallic Materials Under Time Dependent Loading Conditions Using a Mechanical Rheological Model”, In: Proc. of the 5th Cairo University Conference on Mechanical Design and Production MDP 5, 28 30 Dec., Cairo, Egypt, 1991, pp. 23-34 |
| 112. |
Sp. Pantelakis, N. Batsoulas, Th. Kermanidis
“Prediction of the Creep Behaviour and Creep Life of Metallic Materials Under Time Dependent Loading Conditions Using a Mechanical Rheological Model”, In: Proc. of the 5th Cairo University Conference on Mechanical Design and Production MDP 5, 28 30 Dec., Cairo, Egypt, 1991, pp. 23-34 |
| 113. |
Sp. Pantelakis, D. Tsahalis, Th. Kermanidis, St. Kalogeropoulos
“Experimental Investigation of the Superplastic Forming Technique Using Continuous Carbon Fiber Reinforced PEEK”, In: Proc. of the fourth European Conference on Composite Materials, 25‑28 Sept. Stuttgart, F.R.Germany, 1990, pp. 79‑87 |
