Tserpes Konstantinos


Journals
1. A. G. Stamopoulos, A. P. Psaropoulos, K. Tserpes, Experimental and numerical investigation of the effects of porosity on the in-plane shear properties of CFRPs using the V-notched rail shear test method
2. K. Tserpes, V. Tzatzadakis, Synthesis and Experimental Characterization of a MWCNT-Filled Bio-Based Adhesive. Aerospace 2021, 8, 26
3. Michael Noeske, Welchy Leite Cavalcanti, Hauke Brüning, Bernd Mayer, Antonios Stamopoulos, Apostolos Chamos, Thomas Krousarlis, Paweł H Malinowski, Wiesław M Ostachowicz, Konstantinos Tserpes, Kai Brune, Romain Ecault, Introduction to Recent Advances in Quality Assessment for Adhesive Bonding Technology
4. Konstantinos Tserpes, Elli Moutsompegka, Mareike Schlag, Kai Brune, Christian Tornow, Ana Reguero Simón, Romain Ecault, Characterization of Pre-bond Contamination and Aging Effects for CFRP Bonded Joints Using Reference Laboratory Methods, Mechanical Tests, and Numerical Simulation
5. Welchy Leite Cavalcanti, Elli Moutsompegka, Konstantinos Tserpes, Paweł H Malinowski, Wiesław M Ostachowicz, Romain Ecault, Neele Grundmann, Christian Tornow, Michael Noeske, Peter Schiffels, Bernd Mayer, Integrating Extended Non-destructive Testing in the Life Cycle Management of Bonded Products - Some Perspectives
6. Romain Ecault, Ana Reguero Simon, Célian Cherrier, Paweł H Malinowski, Tomasz Wandowski, Mirosław Sawczak, Kai Brune, Hauke Brüning, Mareike Schlag, Johannes Derksen, Welchy Leite Cavalcanti, Laurent Berthe, Maxime Sagnard, Wiesław M Ostachowicz, Saverio De Vito, Andreas Helwig, Rainer Stössel, Damien Segur, Apostolos Chamos, Konstantinos Tserpes, Extended Non-destructive Testing Technique Demonstration in a Realistic Environment with Technology Assessment
7. Welchy Leite Cavalcanti, Kai Brune, Michael Noeske, Konstantinos Tserpes, Wiesław M. Ostachowicz, Mareike Schlag, Adhesive Bonding of Aircraft Composite Structures: Non-destructive Testing and Quality Assurance Concepts
8. Dionysios N. Markatos, Christos V. Katsiropoulos, Konstantinos I. Tserpes, Spiros G. Pantelakis, A holistic End-of-Life (EoL) Index for the quantitative impact assessment of CFRP waste recycling techniques
9. Konstantinos Tserpes, Vasileios Tzatzadakis, Synthesis and Experimental Characterization of a MWCNT-Filled Bio-Based Adhsive
10. Jens Bachmann, Xiaosu Yi, Konstantinos Tserpes, Carmen Sguazzo, Lucia Gratiela Barbu, Barbara Tse, Constantinos Soutis, Eric Ramón, Hector Linuesa, Stéphane Bechtel, Towards a circular economy in the aviation sector using eco-composites for interior and secondary structures. Results and recommendations from the EU/China project ECO-COMPASS
11. Ioannis Floros, Konstantinos Tserpes, Numerical simulation of quasi-static and fatigue debonding growth in adhesively bonded composite joints containing bolts as crack stoppers
12. Konstantinos Tserpes, Elli Moutsompegka, The Effect of Pre-Bond Contamination by Thermal Degradation and De-Icing Fluid on the Tensile Strength of Scarf Composite Bonded Joints
13. Konstantinos Tserpes, Alberto Barroso-Caro, Paolo Andrea Carraro, Vinicius Carrillo Beber, Ioannis Floros, Wojciech Gamon, Marcin Kozłowski, Fabio Santandrea, Moslem Shahverdi, Davor Skejić, Chiara Bedon, Vlatka Rajčić, A review on failure theories and simulation models for adhesive joints
14. Vasileios Tzatzadakis, Konstantinos Tserpes, Production of a novel bio-based structural adhesive and characterization of mechanical properties
15. Selen Ünaldi, Kosmas Papadopoulos, Alexandre Rondepierre, Yann Rouchausse, Alexandra Karanika, Florent Deliane, Konstantinos Tserpes, Giannis Floros, Emmanuel Richaud, Laurent Berthe, Towards selective laser paint stripping using shock waves produced by laser-plasma interaction for aeronautical applications on AA 2024 based substrates
16. Konstantinos Tserpes, Kosmas Papadopoulos, Selen Unaldi, Laurent Berthe, Development of a Numerical Model to Simulate Laser-Shock Paint Stripping on Aluminum Substrates
17. Konstantinos Tserpes, Panagiotis Bazios, Spiros G. Pantelakis, Maria Pappa, Nikolaos Michailidis , Mechanical Characterization of Nanocrystalline Materials via a Finite Element Nanoindentation Model
18. Neele Grundmann, Hauke Brüning, Konstantinos Tserpes, Tim Strohbach, Bernd Mayer, Influence of embedding fiber optical sensors in CFRP film adhesive joints on bond strength
19. Konstantinos Tserpes, Panagiotis Bazios, Spiros Pantelakis, Nikolaos Michailidis, Nanoindentation testig and simulation of nanocrystalline materials
20. Panagiota Polydoropoulou, Konstantinos Tserpes, Spiros Pantelakis, Christos Katsiropoulos, Multiscale modeling of polymers filled with MWCNTs: the effect of dispersion, waviness,interphase and agglomerations
21. Konstantinos Tserpes, Vasileios Tzatzadakis, Jens Bachmann, Electrical Conductivity and Electromagnetic Shielding Effectiveness of Bio-Composites
22. Spiros Pantelakis, Konstantinos Tserpes, Revolutionizing Aircraft Materials and Processes
23. Konstantinos Tserpes, Adhesive bonding of aircraft structures
24. Konstantinos Tserpes, Spiros Pantelakis, Nano-enabled Multifunctional Materials: Mechanical Behavior and Multi-scale Modeling
25. Panagiotis Bazios, Konstantinos Tserpes, Spiros Pantelakis, Modelling and Experimental Validation of the Porosity Effect on the Behaviour of Nano-Crystalline Materials
26. Vasileios Tzatzadakis, Konstantinos Tserpes, Experimental characterization of the hygrothermal ageing effects on the bulk mechanical properties and lap-shear strength ofhe novel bio-based epichlorohydrin/cardanol adhesive
27. I. Floros, K. Tserpes, Fatigue crack growth characterization in adhesive CFRP joints
28. Konstantinos Tserpes, Numerical evaluation of crack stopping mechanisms in composite bonded joints due to corrugation and bolts
29. Konstantinos Tserpes, Vasileios Tzatzadakis, Computation of mechanical, thermal and electrical properties of CNT/polymer multifunctional nanocomposites using numerical and analytical models
30. Panagiotis Bazios, Konstantinos Tserpes, Spiros Pantelakis, Numerical Computation of Material Properties of Nanocrystalline Materials Utilizing Three-Dimensional Voronoi Models
31. Xiaosu Yi, Konstantinos Tserpes, Special issue "ECO-COMPASS: Ecological and Mutifunctionl Composites for Application in Aircraft Interior and Secondary Structures"
32. Xiaosu Yi, Konstantinos Tserpes, ECO-COMPASS: Ecological and multifunctional composites for application in aircraft interior and secondary structures
33. E. Moutsompegka, K. Tserpes, M. Noeske, M. Schlag, K. Brune, Experimental investigation of the effect of pre-bond contamination with fingerprints and ageing on the fracture toughness of composite bonded joints
34. Konstantinos Tserpes, Ioannis Floros, Fatigue crack growth simulation in adhesively bonded composite joints
35. Konstantinos Tserpes, Vasileios Tzatzadakis, Christos Katsiropoulos, Effect of hygrothermal ageing on the interlaminar shear strength of carbon fiber-reinforced rosin-based epoxy bio-composites
36. Theodoros Karakasidis, Serafim Kalliadasis, Petros Koumoutsakos, Konstantinos Tserpes, Schmauder Siegfried, This special issue of the journal Computational Materials Science on "Multiscale Materials Modeling" Preface
37. Marina C. Vasco, Konstantinos I. Tserpes, Spiros G. Pantelakis, Numerical Simulation of Tensile Behavior of Corroded Aluminum Alloy 2024 T3 Considering the Hydrogen Embrittlement, Metals 2018, 8(1), 56
38. Konstantinos Tserpes, Christos Kora, A Multi-Scale Modeling Approach for Simulating Crack Sensing in Polymer Fibrous Composites Using Electrically Conductive Carbon Nanotube Networks. Part II: Meso- and Macro-Scale Analyses
39. Nikolaos Tselentis, Konstantinos Tserpes, A Coupled Electro-Thermal Model for Simulating the Lightning Strike Damage in Cfrps
40. P. V. Polydoropoulou, K. I. Tserpes, Sp. G. Pantelakis, Ch. V. Katsiropoulos, A parametric prediction of the Young's modulus of polymers enhanced with MWCNTs
41. Panagiotis Bazios, Konstantinos Tserpes, Spiros Pantelakis, Computation of elastic moduli of nanocrystalline materials using Voronoi models of representative volume elements
42. Konstantinos I. Tserpes, Aggeliki Chanteli, Multiscale Continuum Modeling of Carbon Nanotube-Reinforced Polymers
43. Antonios Stamopoulos, Konstantinos Tserpes, Argyris Dentsoras, Prediction of mechanical properties of porous CFRP specimens by ANNs and X-ray CT data
44. Panagiotis Bazios, Konstantinos Tserpes, Spiros Pantelakis, Prediction of mechanical properties of nanocrystalline materials using Voronoi FE models of representative volume elements
45. A.G. Stamopoulos, K. I. Tserpes, A. J. Dentsoras, Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks
46. Pawel H. Malinowski, Konstantinos I. Tserpes, Romain Ecault, Wieslaw M. Ostachowicz , Mechanical and non-destructive study of CFRP adhesive bonds subjected to pre-bond thermal treatment and de-icing fluid contamination
47. M. Hoffmann, K. Tserpes, E. Moutsompegka, M. Schlag, K. Brune, Determination of adhesion strength of pre-bond contaminated composite-to-metal bonded joints by centrifuge tests
48. Jens Bachmann, Xiaosu Yi, Hugh Gong, Xavier Martinez, Gabriel Bugeda, Sergio Oller, Konstantinos Tserpes, Eric Ramon, Christophe Paris, Pedro Moreira, Zhengping Fang, Yan Li, Yanfeng Liu, Xiaoqing Liu, Guijun Xian, Jianfeng Tong, Jiahu Wei, Xufeng Zhang, Jin Zhu, Songqi Ma, Tao Yu, Outlook on ecologically improved composites for aviation interior and secondary structures
49. Konstantinos Tserpes, A. Chanteli, Sp. Pantelakis, E. P. Koumoulos, C. A. Charitidis, Mechanical and nanomechanical properties of MWCNT/PP nanocomposite
50. A. G. Stamopoulos, K. I. Tserpes, Sp. G. Pantelakis, Multiscale finite element prediction of shear and flexural poperties of porous CFRP laminates utilizing X-ray CT data
51. R Růžek, M Kadlec, K Tserpes, E Karachalios, Monitoring of compressive behaviour of stiffened composite panels using embedded fibre optic and strain gauge sensors, International Journal of Structural Integrity 8 (1), (2017)
52. Stamopoulos A.G., Tserpes K.I., Pantelakis S., Multiscale finite element prediction of shear and flexural properties of porous CFRP laminates utilizing X-ray CT data, Theoretical and Applied Fracture Mechanics (2017)
53. E. Moutsompegka, K.I. Tserpes, P. Polydoropoulou, C. Tornow, M. Schlag, K. Brune, B. Mayer, S. Pantelakis, Experimental study of the effect of pre-bond contamination with de-icing fluid and ageing on the fracture toughness of composite bonded joints, Fatigue & Fracture of Engineering Materials & Structures, 40(10), pp. 1581-1591, (2017)
54. K. I. Tserpes, E. Moutsompegka, O. Murariu, L. Bonnaud, A. Chanteli, Experimental investigation of the effect of hygrothermal aging on the mechanical performance of carbon nanotube/PA6 nanocomposite, Plastics, Rubber and Composites, 46(6), pp. 239-244, (2017)
55. K. I. Tserpes, A. Chanteli, I. S. Floros, Prediction of yield strength of MWCNT/PP nanocomposite considering the interphase and agglomeration, Composite Structures, Volume 168, pp. 657-662, (2017)
56. K.I. Tserpes, A.S. Koumpias, Molecular mechanics-based finite element analysis of graphene sheet and carbon nanotubes using the rebo potential, International Journal of Modeling, Simulation, and Scientific Computing, Volume 08, Issue 03, 1750038 (2017)
57. Růžek. Roman, Martin Kadlec, Konstantinos Tserpes, Evaggelos Karachalios, CFRP Fuselage Panel Behavior Monitoring Using Fibre Optic and Resistance Sensors and Optical Contactless Measurements,Applied Mechanics and Materials 827,p.51-56 (2016)
58. Roham Rafiee, Timon Rabczuk, Abbas S Milani, Konstantinos I Tserpes, Advances in Characterization and Modeling of Nanoreinforced Composites Journal of Nanomaterials, (2016)
59. AK Manta, KI Tserpes, Parametric numerical simulation of impact response of carbon nanotube/polymer nanocomposites,Plastics, Rubber and Composites 45(4),p.157-162, (2016)
60. Asimina Manta, Konstantinos I Tserpes, Numerical computation of electrical conductivity of carbon nanotube-filled polymers,Composites Part B: Engineering, 100(1),p.240–246, (2016)
61. KI Tserpes, G Peikert, IS Floros, Crack stopping in composite adhesively bonded joints through corrugation,Theoretical and Applied Fracture Mechanics 83,p.152-157, (2016)
62. KI Tserpes, AG Stamopoulos, Sp G Pantelakis, A numerical methodology for simulating the mechanical behavior of CFRP laminates containing pores using X-ray computed tomography data,Composites Part B: Engineering 102,p.122-133, (2016)
63. KI Tserpes, AS Koumpias, A numerical methodology for optimizing the geometry of composite structural parts with regard to strength.Composites Part B: Engineering(68), pp.176-184 (2015)
64. Dorothea Setsika, Konstantinos Tserpes, Spiros Pantelakis, Numerical simulation of tensile behavior of corroded aluminum alloy 2024 T3. International Journal of Structural Integrity 6(4), pp.451-467, (2015)
65. Roman Ružek, Konstantinos Tserpes, Evaggelos Karachalios, Compression after impact and fatigue behavior of CFRP stiffened panels. International Journal of Structural Integrity 6(2),pp.176-193, (2015)
66. George Sih, Konstantinos Tserpes, Editorial (ICAF-2014),International Journal of Structural Integrity 6 (4)
67. IS Floros, KI Tserpes, T Löbel, Mode-I, mode-II and mixed-mode I+ II fracture behavior of composite bonded joints: Experimental characterization and numerical simulation. Composites Part B: Engineering (78), pp.459-468, (2015)
68. AG Stamopoulos, KI Tserpes, P Prucha, D Vavrik, Evaluation of porosity effects on the mechanical properties of carbon fiber-reinforced plastic unidirectional laminates by X-ray computed tomography and mechanical testing. Journal of Composite Materials 50 (15),p.2087-2098 (2015)
69. Aggeliki Chanteli, Konstantinos I Tserpes, Finite element modeling of carbon nanotube agglomerates in polymers.Composite Structures (132),pp.1141-1148, 2015
70. K.I. Tserpes, I. Vatistas, Buckling analysis of pristine and defected graphene, Mechanics Research Communications, 64, pp. 50-56, (2015)
71. Tserpes, K.I., Silvestre, N., Modeling of Carbon Nanotubes, Graphene and their Composites.Springer Series in Materials Science 188.(2014)
72. Koumpias, A.S., Tserpes, K.I., Pantelakis, S., Progressive damage modelling of 3D fully interlaced woven composite materials,Fatigue and Fracture of Engineering Materials and Structures 37 (7), pp. 696-706.(2014)
73. Markatos, D.N., Tserpes, K.I., Rau, E., Brune, K., Pantelakis, S.P., Degradation of mode-I fracture toughness of CFRP bonded joints due to release agent and moisture pre-bond contamination,Journal of Adhesion 90 (2), pp. 156-173 (2014)
74. Tserpes, K.I., Papanikos, P., Finite Element Modeling of the Tensile Behavior of Carbon Nanotubes, Graphene and Their Composites,Springer Series in Materials Science 188, pp. 303-329(2014)
75. Kolks, G., Tserpes, K.I., Efficient progressive damage modeling of hybrid composite/titanium bolted joints,Composites Part A: Applied Science and Manufacturing 56, pp. 51-63(2014)
76. Tserpes, K.I., Karachalios, V., Giannopoulos, I., Prentzias, V., Ruzek, R, Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part I: Design, manufacturing and impact testing,Composite Structures 107, pp. 726-736(2014)
77. Tserpes K.I , Markatos D.N , Brune K, Hoffmann M , Rau E, Pantelakis Sp, A detailed experimental study of the effects of pre-bond contamination with a hydraulic fluid, thermal degradation, and poor curing on fracture toughness of composite-bonded joints ,Journal of Adhesion Science and Technology 28 (18), pp. 1865-1880(2014)
78. Pantelakis, S., Tserpes, K.I., Adhesive bonding of composite aircraft structures: Challenges and recent developments,Science China: Physics, Mechanics and Astronomy 57 (1), pp. 2-11(2014)
79. Tserpes K.I., Koumpias A.S., A numerical methodology for optimizing the geometry of composite structural parts with regard to strength,Composites Part B: Engineering 68, pp. 176-184(2014)
80. Ruzek, R., Kudrna, P., Kadlec, M., Karachalios, V., Tserpes, K.I. , Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part II: Mechanical testing and validation ,Composite Structures 107, pp. 726-736 (2014)
81. Chanteli, A., Tserpes, K.I. , Tensile behaviour of carbon nanotube/polypropylene composite material ,Plastics, Rubber and Composites 43 (10), pp. 330-336(2014)
82. Berto, F., Elices, M., Ayatollahi, M.R., Panin, S.V., Tserpes, K. , Brittle or quasi-brittle fracture of engineering materials: Recent developments and new challenges, Advances in Materials Science and Engineering 2014, 347485(2014)
83. Sp. Pantelakis, K.I. Tserpes, Adhesive Bonding of Composite Aircraft Structures: Challenges and Recent Developments. Science China Physics, Mechanics & Astronomy(57) No.1, p.p. 1-10, (2014)
84. Markatos, D.N., Tserpes, K.I., Rau, E., Markus, S., Ehrhart, B., Pantelakis, Sp., The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use ,(2013), Composites Part B: Engineering, 45 (1), pp. 556-564. (2013)
85. Tserpes, K.I., Chanteli, A., Parametric numerical evaluation of the effective elastic properties of carbon nanotube-reinforced polymers ,(2013), Composite Structures, 99, pp. 366-374.
86. D. Markatos, K. I. Tserpes , E. Rau , K. Brune, S. Pantelakis, Degradation of Mode-I Fracture Toughness of CFRP Bonded Joints Due to Release Agent and Moisture Pre-Bond Contamination, The Journal of Adhesion, 90(2), pp. 156-173, (2013)
87. Katsiropoulos, Ch.V., Chamos, A.N., Tserpes, K.I., Pantelakis, Sp.G., Fracture toughness and shear behavior of composite bonded joints based on a novel aerospace adhesive (2012) Composites Part B: Engineering, 43 (2), pp. 240-248.
88. Tserpes, K.I., Ruzek, R., Pantelakis, Sp., Strength of Pi shaped non-crimp fabric adhesively bonded joints ,(2012), Plastics, Rubber and Composites, 41 (2), pp. 100-106.
89. Tserpes, K.I., Strength of graphenes containing randomly dispersed Vacancies (2012) Acta Mechanica, 223 (4), pp. 669-678.
90. Labeas, G.N., Belesis, S.D., Diamantakos, I., Tserpes, K.I., Adaptative progressive damage modeling for large-scale composite structures ,(2012), International Journal of Damage Mechanics, 21 (3), pp. 441-462.
91. Tserpes, K.I., Koumpias, A.S., Comparison between a cohesive zone model and a continuum damage model in predicting mode-I fracture behavior of adhesively bonded joints ,(2012), CMES - Computer Modeling in Engineering and Sciences, 83 (2), pp. 169-181.
92. K. Tserpes, Sp. G. Pantelakis, V. Kappatos, ‘‘The effect of imperfect bonding on the mechanical performance of non-crimp fabric Pi-shaped joints’’,2011, accepted for publication in the journal of Computational Materials Science
93. Stamatelos D.G., Labeas G.N., Tserpes K.I., "Analytical calculation of local buckling and post-buckling behavior of isotropic and orthotropic stiffened panels",2011,"Thin-Walled Structures",Vol.49(3),p.p.422-430
94. Tserpes, K.I., “Strength of graphenes containing randomly dispersed vacancies”,(2011), “Acta Mechanica”, pp. 1-10
95. Tserpes, K.I., Ruzek, R., Mezihorak, R., Labeas, G.N., Pantelakis, S.G., “The structural integrity of a novel composite adhesively bonded flap-track beam”,(2011),“Composite Structures”, 93 (8), pp. 2049-2059.
96. Tserpes, K.I., Cinquin, J., Pantelakis, Sp., “On the mechanical performance of noncrimp fabric H-shaped adhesively bonded joints”,(2011), “Journal of Composite Materials”, 45 (15), pp. 1607-1619.
97. Sp.G.Pantelakis, Ch.V.Katsiropoulos, K.I.Tserpes, Th.Felgeyrolles , ‘‘Effect of water absorption on strength of the aeronautical composite material Fiberdux HTA/6376’’, Key Engineering Materials (Vols. 417-418), 2010, p.p. 457-460
98. K.I. Tserpes, Jacques Cinquin, Sp. Pantelakis, ‘‘On the mechanical performance of non-crimp fabric H-shaped adhesively bonded joints’’, accepted for publication in the Journal of Composite Materials
99. Llopart P. Ll., Tserpes K.I., Labeas G.N., "Experimental and numerical investigation of the influence of imperfect bonding on the strength of NCF double-lap shear joints",2010,"Composite Structures",Vol.92(7),p.p.1673-1682
100. Tserpes K.I., Labeas G., Pantelakis S., "Multi-scale modeling of the mechanical response of plain weave composites and cellular solids",2010,"Theoretical and Applied Fracture Mechanics",Vol.54(3),p.p.172-179
101. K. I. Tserpes, Sp. Pantelakis, Size effects in the mechanical properties of carbon nanotubes
102. K.I. Tserpes, G.N. Labeas, ‘Mesomechanical analysis of Non-Crimp Fabric Composite Structural Parts’, in Composite Structures 87 (4), pp. 358-369 (2009)
103. K. I. Tserpes and G. N. Labeas, ‘Progressive fracture analysis of planar lattices and shape-morphing Kagome-structure”, in Theoretical and Applied Fracture Mechanics, Vol. 51, Issue 1, pp. 41-47, (2009)
104. K.I. Tserpes, P. Papanikos, G.N. Labeas, Sp. G. Pantelakis, ‘‘Multi-scale modeling of tensile behaviour of carbon nanotube-reinforced composites’’, Theoretical & Applied Fracture Mechanics (49), 2008, p.p. 51-60
105. Papanikos, P., Nikolopoulos, D.D., Tserpes, K.I. (2008), Equivalent beams for carbon nanotubes. COMPUTATIONAL MATERIALS SCIENCE 43(2), 345-352
106. D. Peng, R. Jones, L. Molent, S. Pitt, K. I. Tserpes, P. Papanikos, G. Labeas, Sp. G. Pantelakis, C. A. Rodopoulos, G. Chliveros, F. Morel, N. Huyen, J. Zhao, R. Liu, X. J. Wu, J. Andersons, J. Modniks, Y. Leterrier, G. Tornare, P. Dumont, J. A. E. Manson, M. Kotoul, T. Vyslouzil, A. R. Boccaccini, I. Dlouhy, T. J. C. Liu, Fatigue crack growth behavior of cables and steel wires for the cable-stayed portion of Runyang bridge: Disproportionate loosening and/or tightening of cables …
107. P. Papanikos, K.I. Tserpes, Sp.G. Pantelakis, ‘‘Initiation and progression of composite patch debonding in adhesively repaired cracked metallic sheets’’, Composite Structures (81), 2007, p.p. 303-311
108. K.I. Tserpes, P. Papanikos, The effect of Stone–Wales defect on the tensile behavior and fracture of single-walled carbon nanotubes, Composite Structures, 79(4), pp. 581-589, (2007)
109. K.I. Tserpes, P. Papanikos, S.A. Tsirkas, A progressive fracture model for carbon nanotubes. COMPOSITES PART B: ENGINEERING 37(7-8), 662-669, (2006)
110. P. Papanikos, K.I. Tserpes, G. Labeas, Sp. Pantelakis, ‘‘Progressive Damage Modelling of Bonded Composite Repairs’’, Theoretical and Applied Fracture Mechanics (43), 2005, p.p. 189-198
111. K. I. Tserpes, P. Papanikos, G. Labeas, Sp. Pantelakis, “Fatigue Damage Accumulation and Residual Strength Assessment of CFRP Laminates”, Composite Structures, 63 (2004), pp. 219-230
112. P. Papanikos, K. I. Tserpes, S. Pantelakis, Modelling of fatigue damage progression and life of CFRP laminates, Fatigue & Fracture of Engineering Materials & Structures, 26(1), pp. 37-47, (2003)
113. K. I. Tserpes, G. Labeas, P. Papanikos, Th. Kermanidis, “Strength prediction of bolted joints in graphite/epoxy composite laminates”, Composites Part B, Vol. 33 is. 7, 2002, p.p. 521-529
114. K. I. Tserpes, P. Papanikos, T. Kermanidis, A three‐dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading, Fatigue & Fracture of Engineering Materials & Structures, 24(10), pp. 663–675, (2001)
115. K. Tserpes, P. Papanikos, Th. Kermanidis, “A three-dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading”, Fatigue Fracture Engineering Materials & Structures, Vol. 24, 2000, p.p. 663-675
Conferences
116. K. I. Tserpes, Aggeliki Chanteli, E.P. Koumoulos, S. Pantelakis, C. A. Charitidis
Mechanical and nanomechanical properties of MWCNT/PP nanocomposite, 7th EASN International Conference, Warsaw, Poland, September 26-29 2017
117. Malinowski P.H., Tserpes K.I., Ecault R., Ostachowicz W.M.
Study of adhesive bonds by mechanical tests, ultrasounds and electromechanical impedance method,Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring (IWSHM 2017), Stanford, California, USA, September 12-14 2017
118. Aggeliki Chanteli, Konstantinos Tserpes, Spiros Pantelakis
Multi-scale Simulation of Tensile Behavior of MWCNT/PP Nanocomposite, VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete, 5-10 June 2016
119. K.I. Tserpes, Antonis G. Stamopoulos, Sp. G. Pantelakis
A Multi-Scale Numerical Methodology For Predicting The Mechanical Properties of Porous CFRP Laminates Using Data from X-ray Computerized Tomography, 17th European Conference on Composite Materials (ECCM17), Munich, Germany, 26-29 June 2016
120. A.G. Stamopoulos, K.I. Tserpes, Sp.G. Pantelakis
Numerical Evaluation of shear and flexural properties of porous CFRP laminates utilizing X-Ray CT data, 6th EASN International Conference on Innovation in the European Aeronautics Research , Porto, Portugal, October 18 – 21 2016
121. E. Moutsompegka, K. Tserpes, O. Murariu, L. Bonnaud
Experimental investigation of the effect of hydrothermal ageing on the mechanical behaviour of carbon nanotube /PA 6 nano composite,6th EASN International Conference on Innovation in the European Aeronautics Research , Porto, Portugal, October 18 – 21 2016
122. E. Moutsompegka, P. Polydoropoulou, K. I. Tserpes, C. Tornow, M. Schlag, K. Brune, B. Mayer, S. Pantelakis
The effects of pre-bond contamination with de-icing fluid on the mode-I and mode-II fracture toughness of composite bonded joints, 6th EASN International Conference on Innovation in the European Aeronautics Research , Porto, Portugal, October 18 – 21 2016
123. I.S. Floros and K.I. Tserpes
A comparison between CZM and VCCT methods in predicting mixed-mode I +II crack growth in composite bonded joints with and without crack stoppers, 6th EASN International Conference on Innovation in the European Aeronautics Research , Porto, Portugal, October 18 – 21 2016
124. Asimina Manta, K.I. Tserpes
A multi-scale numerical model for simulating the low-velocity impact response of carbon nanotube-reinforced polymers, VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete Isl., Greece, June 5-10 2016
125. Asimina Manta, K.I. Tserpes
Finite Element Analysis of Electrical Properties of Carbon Nanotube-Filled Polymers, 4th International Conference on Engineering Against Failure (ICEAF IV), Skiathos Isl., Greece, June 24-26 2015
126. Ioannis Floros, Konstantinos Tserpes
Numerical simulation of the mechanical performance of composite bonded joints containing X-bolt crack stoppers. 18th International Conference on Composites Structures, Lisbon, 15-18 June 2015
127. K.I. Tserpes, G. Peikert, I. Floros
The Effectiveness of Corrugation as a Crack Stopper in Composite Bonded Joints. 4th International Conference of Engineering Against Failure (ICEAF IV),Skiathos Isl.,24-26 June 2015, Greece
128. K.I. Tserpes, I. Straumit, AG. Stamopoulos, Stepan V. Lomov, Martine Wevers
Modeling of Composite Materials with Fibre Misalignment and Porosity Using X-ray Computed Tomography Data, EASN 5th International Workshop on Aerostructures, Manchester, 2-4 September 2015, UK
129. A.Chanteli, K.I. Tserpes
Finite element modeling of carbon nanotube agglomeration in polymers.ICCS18-18th International Conference on Composite Structures, 15-18 June 2015, Lisboa, Portugal
130. Sp.G. Pantelakis, D.D.Setsika, K.I.Tserpes, A.N.Chamos
Modeling the tensile behavior of corroded aircraft aluminum alloy 2024-T3.Proc. of the Aluminium two thousand and ICEB 2015 Conference, May 12-16, 2015, Florence, Italy.
131. Růžek, R., Kadlec, M., Tserpes, K.I., Karachalios, E.
CFRP Fuselage Panels Behaviour in Compression, 53rd International Scientific Conference on Experimental Stress Analysis (EAN 2015), Cesky Krumlov, Czech Republic, June 1–4 2015
132. A.Chanteli, K.I. Tserpes
A Multi-scale FE Modeling Approach for Predicting Strength of Carbon Nanotube-Doped Composite Structures, 2nd International Conf. on Airworthiness & Fatigue - 8th ICSAELS Series Conf. 14-18 July, 2014 Patras, Greece
133. Sp, G Pantelakis, D.D Setsika, K.I Tserpes, A.N Chamos
A Corrosion Damage Quantification Approach for Assesing the Tensile Behavior of Corroded Aluminum Alloy 2024.2nd International Conf. on Airworthiness & Fatigue - 8th ICSAELS Series Conf. 14-18July, 2014 Patras, Greece
134. Antonios G. Stamopoulos , Konstantinos I. Tserpes , Petr Prucha , Daniel Vavrik
Characterization of Porous CFRP Laminates by Mechanical Testing and X-ray Computed Tomography. 6th International Symposium on NDT in Aerospace, 12-14th November 2014, Madrid, Spain
135. K.I. Tserpes, L. Guadagno, I. Floros, M. Raimondo, U. Vietri, Sp. Pantelakis
Numerical Modeling of Nanoparticle-Reinforced Adhesively Bonded Joints. 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), July 20 - 25, 2014, Barcelona, Spain
136. Roman Růžek, Martin Kadlec, Konstantinos I. Tserpes, Evanggelos Karachalios
Strain Monitoring in Stiffened Composite Panels Using Embedded Fibre Optical and Strain Gauge Sensors, 7th European Workshop on Structural Health Monitoring (EWSHM 2014), Nantes, France, July 8-11 2014
137. A.S. Koumpias, K.I. Tserpes, Sp. Pantelakis
Geometrical Optimization of Composite Structures with regard to Strength using the Progressive Damage Modeling Method, 1st International Conference on Mechanics of Composites (MECHCOMP 2014), LONG ISLAND, USA, June 8-12 2014
138. K.I. Tserpes, Sp. Pantelakis, Dionysis Markatos
The effects of poor curing, thermal degradation and an aviation fluid on the mode-I fracture toughness of CFRP bonded joints, 3rd International EASN Association Workshop on Aerostructures, Milan, Italy, October 9-11 2013
139. Sp. Pantelakis, K. I. Tserpes, Dionysis Markatos
The effects of pre-bond and after-bond contamination on the fracture toughness of adhesively bonded composite joints, The 5th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2013), Kos Isl., Greece, September 23-26 2013
140. Dionysis Markatos, K. I. Tserpes, Apostolos N. Chamos, Sp. Pantelakis
The combined effects of pre-bond contamination, accelerated ageing and high temperature on the mode-I fracture toughness of CFRP bonded joints, 3rd International Conference of Engineering Against Failure (ICEAF III), Kos Isl., Greece, June 26-28 2013
141. A.S. Koumpias, K. I. Tserpes
Progressive damage modeling of 3D woven composites, 3rd International Conference of Engineering Against Failure (ICEAF III), Kos Isl., Greece, June 26-28 2013
142. D.D. Setsika, Apostolos N. Chamos, Sp.G. Pantelakis, K.I. Tserpes
Investigation of the corrosion damage evolution of aircraft aluminum alloy 2024-T3, 3rd International Conference of Engineering Against Failure (ICEAF III), Kos Isl., Greece, June 26-28 2013
143. Aggeliki Chanteli, K.I. Tserpes
Modeling of the non-linear tensile behavior of a carbon nanotube - polypropylene composite, 17th International Conference on Composite Structures (ICCS17), Porto, Portugal, June 17-21 2013
144. Sp. Pantelakis, K. I. Tserpes
Boltless joining of composite aerostructures: From secondary to primary parts, International Conference on Airworthiness and Fatigue-7th ICSAELS Series Conference, Beijing, China, March 25-27 2013
145. K. I. Tserpes, Ch. Chamakiotis
Cohesive Zone Modeling of the Fracture Behavior of Carbon Nanotube-Reinforced Polymers, 3rd International EASN Association Workshop on Aerostructures, Milan, Italy, October 9-11 2013
146. K.I. Tserpes
A comprehensive study of the size effects on the stiffness and strength of carbon nanotubes and graphene, 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino, Italy, June 18-20 2012
147. K. I. Tserpes, A. S. Koumpias, Sp. Pantelakis
Numerical optimization of composite multi-functional joining profiles with respect to strength, 14th International Congress on Mesomechanics, Budapest, Hungary, September 25-28 2012
148. Sp. Pantelakis, K.I. Tserpes
“Towards a damage tolerant design concept for composite materials and structural parts”, In Proc. of the 4th International Conference on Structural analysis of Advanced Materials, Romania, 7-11 September 2011
149. Paraskevas Papanikos, K.I. Tserpes
Stiffness evaluation of polymers reinforced by specifically or randomly distributed carbon nanotubes, 16th International Conference on Composite Structures (ICCS16), Porto, Portugal, June 28-30 2011
150. Paraskevas Papanikos, K. I. Tserpes, Sp. Pantelakis
Numerical study of carbon nanotube-based crack growth enhancement in polymers, 16th International Conference on Composite Structures (ICCS16), Porto, Portugal, June 28-30 2011
151. Konstantinos I. Tserpes, Paraskevas Papanikos
Fracture Behaviour and Strength of Graphenes Containing Randomly Dispersed Defects, 2nd International Conference of Engineering Against Fracture (ICEAF II), Mykonos, Greece, June 22-24 2011
152. G. Labeas, K. I. Tserpes, S. D. Belesis
Methodology for the solution of large-scale non-linear beam structures, 7th ICCES Special Symposium on Meshless and Other Novel Computational Methods, Zonguldak, Turkey, September 6-10 2011
153. Sp. Pantelakis, K.I. Tserpes, G. Labeas
‘‘A study on the mechanical behavior of textile composite and hybrid materials using multi-scale modeling and experiments’’, to be published in Proc. of the 12th International Congress on Mesomechanics 2010, Taipei, Taiwan, 21-25 June, 2010
154. F.S. Efthimiou, P. Papanikos, K.I. Tserpes, Sp. Pantelakis
‘‘Continuum simulation of the tensile, bending and torsional rigidities of multi-walled carbon nanotubes’’, to be published in Proc. of the 9th HSTAM International Congress on Mechanics, Limassol, Cyprus, 12 – 14 July, 2010
155. K. I. Tserpes, Th. Kermanidis
Progressive damage modeling: A scale-independent strength prediction method, 9th HSTAM International Congress in Mechanics, Limassol, Cyprus, July 12-14 2010
156. Sp.G. Pantelakis, K.I.Tserpes, V.A. Kappatos
‘‘Ultrasonic inspection of imperfect bonding and its effects on the mechanical behavior of NCF Pi-shaped joints’’, In Proc: of the EUROMAT 2009 Conference, Glasgow, September 07-10, 2009
157. K.I. Tserpes and Sp. Pantelakis
‘‘Size effects in the mechanical properties of carbon nanotubes’’, In Proc. of the 9th International Workshop on Mathematical Methods in Scattering Theory & Biomedical Engineering, Patras, Greece, 9-11 October 2009
158. Sp. Pantelakis, K.I. Tserpes
‘‘Modular Bonded Joints for Composite Aerostructures’’, to be published in Proc. of the 9th International Conference on Durability of Composite Systems (Duracosys 2010), Patras, Greece, 12-15 September, 2010
159. K. I. Tserpes, G. Labeas
Global-Local Analysis of a Flap Track Beam Made of Novel Non-Crimp Fabric Composites, 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London, UK, April 1-3 2009
160. K.I. Tserpes, P. Papanikos, Sp. Pantelakis
‘‘Continuum modeling of interfacial load transfer in carbon nanotube/polymer composites subjected to tension and bending’’,: In: CD-ROM Proc. of the 10th MESOMECHANICS: Multiscaling and Mesomechanics in Relation to Sustainability, Safety and Economy of Materials and Structures: Advanced and Smart, Giza, Egypt, January 28-01 February, 2008
161. K.I. Tserpes
Progressive Fracture Analysis of Planar Lattices and Shape-Morphing Kagome Structure, 1st International Conference of Engineering Against Fracture (ICEAF I), Patras, Greece, May 28-30 2008
162. K.I. Tserpes, P. Papanikos, G.N. Labeas, Sp. G. Pantelakis
‘‘Multi-scale modeling of tensile behaviour of carbon nanotube-reinforced composites’’, In: Proc. of the 9th MESOMECHANICS: Particle & continuum aspects of mesomechanics: integrity thresholds for materials and structures, Giens, France, May 13-17, 2007, p.p. 323-330
163. M. Kattis, M. Tsakiri, P. Papanikos, E. Tournas, K. Tserpes.
train Measurment in FRP-Concrete Structures using Geodetical Methods and Optical Sensors. In PROC. OF THE CONFERENCE FOR PYTHAGORAS PROJECTS (5-8 July 2007, Lesvos, Greece)
164. K. I. Tserpes, P. Papanikos
Tensile Behavior and Fracture of Carbon Nanotubes Containing Stone-Wales Defects, Proceedings of the 16th European Conference of Fracture (ECF16), Alexandroupolis, Greece, July 3–7 2006
165. P. Papanikos, K. Tserpes and G. Labeas,
‘‘Progressive damage modelling of bonded composite repairs’’, In: G.C. Sih, Th.B. Kermanidis and Sp.G. Pantelakis (eds.) Proceedings of ‘Multiscaling in Applied Science and Emerging Technology’ Patras (2004) pp. 452-458
166. Th. Kermanidis, K. I. Tserpes, P. Papanikos, G. Labeas, Sp. Pantelakis
“Fatigue Damage Accumulation and Residual Strength Assessment in Composite Laminates Through Progressive Damage Modeling”, In: Proc. of International Conference on Computational Mesomechanics associated with Development and Fabrication of Use-Specific Materials, The University of Tokyo, 26-28 August, Japan, Sanjyo-Hall, 2003, p.p. 167-174
167. Sp. Pantelakis, K.I. Tserpes
“Fatigue Damage Modelling and Life Assessment of Ageing Composite Aircraft Components”, In: CD-ROM Proc. of the GRACM 2002 Congress on Computational Mechanics, 27-29 June, Patras, 2002
168. K. I. Tserpes, P. Papanikos, Th.Kermanidis
“Progressive fatigue damage modeling of CFRP laminates at the mesoscale level”, In: Proc. of the “International Symposium of Multiscaling Mechanics”, Messini, Greece, September 2-6, 2002
169. Papanikos, P., Tserpes, K.I.
Modelling of tensile behaviour of composite bolted joints. In: CD-ROM PROCEEDINGS OF THE GRACM 2002 CONGRESS (June 21-27, Patras, Greece, 2002)
170. Kermanidis, Al.Th., Mitropoulos, I.A., Diamantoudis, A.Th., Tserpes, K.I.
The effect of trapped hydrogen on the mechanical properties of 2024 aircraft aluminium alloy. In: PROCEEDINGS OF THE ‘RECENT ADVANCES IN MECHANICAL ENGINEERING’ CONFERENCE, ASME International, Greek Section (Patras, September 17-20, Greece, 2001)
171. Th. Kermanidis, G. Labeas, K.I. Tserpes, Sp. Pantelakis,
“Finite Element Modelling of Damage Accumulation in Bolted Composite Joints Under Incremental Tensile Loading”, In: CD-ROM Proc. of the 3rd European Congress on Computational Methods in Applied Science and Engineering, 11-14 September, Barcelona, Spain, 2000 (edited by E. Onate)